Paper
1 May 1997 Some quality issues of low-cost 1300-nm laser diodes packaged in receptacles
Marie Morin, S. Prigent, G. Terol, Pascal Y. Devoldere
Author Affiliations +
Abstract
Laser diodes packaged in receptacles are attractive candidates for the deployment of optics in the Access Network because of their simple design and easy handling. Nevertheless, such devices may suffer from specific issues which affect their output power stability. Two different types of receptacle technologies based respectively on the FC/PC and the EC connector concepts have been carefully investigated. The electro-optic characterization has mainly consisted in the recording of P(I) over a large temperature range and in the measurement of mating repeatability. In addition, the inner `optical structure' of each type of device has been investigated by low coherence reflectometry. The results obtained show that the EC concept makes it possible to design laser diode receptacles with good properties: repeatability (approximately equals 0.1 dB) and random mating (approximately equals 0.5 dB). On the other hand, FC/PC receptacles exhibit random mating higher than 1 dB, a fact which illustrates the strong impact of the patchcord on coupled power. In addition, depending upon the patchcord and temperature of testing, P(I) curves of FC/PC receptacles may exhibit strong non-linearities. The investigation of such devices with low coherence reflectometry shows that they are due to multiple optical reflections in the cavity formed by the front facet laser and the fiber end. Such a behavior highlights the weakness of the basic concept of FC/PC receptacles. That physical contact is difficult to maintain whatever the patchcord and the environmental temperature conditions.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marie Morin, S. Prigent, G. Terol, and Pascal Y. Devoldere "Some quality issues of low-cost 1300-nm laser diodes packaged in receptacles", Proc. SPIE 3004, Fabrication, Testing, and Reliability of Semiconductor Lasers II, (1 May 1997); https://doi.org/10.1117/12.273820
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Semiconductor lasers

Connectors

Reflectivity

Erbium

Manufacturing

Electro optics

RELATED CONTENT


Back to Top