15 May 1997 Time-multiplexed autostereoscopic camera system
Author Affiliations +
A camera system has been developed to provide live 3D video input for a time-multiplexed autostereoscopic display. The system is capable of taking video input from up to sixteen sources and multiplexing these into a single video output stream with a pixel rate an order of magnitude faster than the individual input streams. Both monochrome and color versions of the system have been built. Testing of the system with eight cameras and a Cambridge autostereo display has produced excellent live autostereoscopic video. The basic operation of the camera system is to digitize multiple input video streams, one for each view direction, and to multiplex these into a single autostereoscopic video stream. A simple circuit boards (the camera board) can digitize, process and buffer the video input from a single video source. Several of these are connected together via a backplane to another circuit board (the multiplexer board) which contains all the circuitry necessary for generating the output video and synchronization signals and for controlling the rest of the system. Alignment and synchronization were two major challenges in the design of the system. Pixel-level control of camera alignment is provided by an image processing chip on each camera board, while synchronization is provided by a number of carefully designed control mechanisms.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Neil A. Dodgson, Neil A. Dodgson, John R. Moore, John R. Moore, Stewart R. Lang, Stewart R. Lang, } "Time-multiplexed autostereoscopic camera system", Proc. SPIE 3012, Stereoscopic Displays and Virtual Reality Systems IV, (15 May 1997); doi: 10.1117/12.274500; https://doi.org/10.1117/12.274500

Back to Top