2 May 1997 Feasibility study of a gas microstrip detector for medical applications
Author Affiliations +
Abstract
The goal of this study is to optimize the gas composition medium and strip geometry of a small-field of view gas- microstrip detector for medical imaging applications, such as x-ray digital imaging, computed tomography, quantitative autoradiography, including other nuclear medicine applications. The gas multiplication factor as well as the electrical parameters of the microstrip substrate have been studied. The results of this study indicate that an adequate gas multiplication process can be achieved with a Xe filled gas detector operating up to 10 atm.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
George C. Giakos, George C. Giakos, Samir Chowdhury, Samir Chowdhury, Srinivasan Vedantham, Srinivasan Vedantham, Amlan Dasgupta, Amlan Dasgupta, Bindu Pillai, Bindu Pillai, P. Ghotra, P. Ghotra, Sankararaman Suryanarayanan, Sankararaman Suryanarayanan, J. Odogba, J. Odogba, "Feasibility study of a gas microstrip detector for medical applications", Proc. SPIE 3032, Medical Imaging 1997: Physics of Medical Imaging, (2 May 1997); doi: 10.1117/12.274016; https://doi.org/10.1117/12.274016
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

X ray and UV detection with the Micro Hole and...
Proceedings of SPIE (August 17 2005)
X-ray dosimetry with low-capacitance silicon detector
Proceedings of SPIE (December 15 1993)
Matrix-addressed x-ray detector arrays
Proceedings of SPIE (November 20 2000)
CVD diamond films for synchrotron radiation beam monitoring
Proceedings of SPIE (October 05 1999)
Pulse width variation along the x ray direction in the...
Proceedings of SPIE (April 10 1996)

Back to Top