Relaxor-based single-crystal materials for ultrasonic transducer applications

Seung Eek Eagle Park; Patrick D. Lopath; K. Kirk Shung; Thomas R. Shrout

doi:10.1117/12.271324

10 April 1997 Relaxor-based single-crystal materials for ultrasonic transducer applications

Seung Eek Eagle Park, Patrick D. Lopath, K. Kirk Shung, Thomas R. Shrout

Proceedings Volume 3037, Medical Imaging 1997: Ultrasonic Transducer Engineering; (1997) https://doi.org/10.1117/12.271324
Event: Medical Imaging 1997, 1997, Newport Beach, CA, United States

Abstract

Relaxor ferroelectric single crystals of Pb(Zn_1/3Nb_2/3)O₃ (PZN), Pb(Mg_1/3Nb_2/3)O₃ (PMN) and their solid solutions with normal ferroelectric PbTiO₃ (PT) were investigated for ultrasonic transducer applications. Crystals offer adjustable properties not only by compositional tailoring but also by domain state engineering associated with different crystallographic orientation, which is not achievable in polycrystalline materials. Longitudinal coupling coefficients (k₃₃) as high as 94% and dielectric constants (K₃^T) in the range of 3500 - 6000 were achieved with low dielectric loss (less than 1%) using <001> oriented rhombohedral crystals of (1-x)PZN-xPT and (1-y)PMN-yPT, where x less than 0.09 and y less than 0.35. Dicing direction as well as poling direction were critical for high coupling under laterally clamped condition. Dicing parallel to the (001) yields 90% of laterally clamped coupling (k_bar) out of 94% longitudinal coupling (k₃₃) for PZN-8%PT. On the other hand, samples diced parallel to (110) exhibited no dominant mode present. Thickness coupling (k_T) as high as 64% and low dielectric constant (K₃^T) less than 600 with low loss (less than 1%) could be achieved using tetragonal crystals of (1-x)PZN-xPT and (1-y)PMN-yPT, where x greater than 0.1 and y greater than 0.4. The performance gains associated with these ultra-high coupling coefficients and range of dielectric constants are evident in relation to broader bandwidth and electrical impedance matching. Specifically, rhombohedral crystals offer the possibility of extremely broad bandwidth devices for transducer arrays and tetragonal crystals for single element transducers. Transducer simulation was performed using the KLM model. The pulse/echo response simulated a 124% bandwidth subdiced array element with a center frequency of 10 MHz. An optimized array design of the same geometry constructed of PZT 5H displays an 87% bandwidth.

Citation Download Citation

Seung Eek Eagle Park, Patrick D. Lopath, K. Kirk Shung, and Thomas R. Shrout "Relaxor-based single-crystal materials for ultrasonic transducer applications", Proc. SPIE 3037, Medical Imaging 1997: Ultrasonic Transducer Engineering, (10 April 1997); https://doi.org/10.1117/12.271324

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available