23 May 1997 Hybrid composite rebars for smart concrete structures
Author Affiliations +
Abstract
In reinforced concrete structures, steel reinforcing bars (rebars) corrode with time and thus reduce their life span. Composite rebars can be used in lieu of steel rebars to overcome this problem. The conventional composite rebars designed to take tensile force are composed of unidirectional fibers in a resin matrix, and are linearly elastic till failure; thus providing a brittle behavior. The problems of corrosion and brittle behavior can be solved by using a composite rebar which fails gradually under tension. The rebar consists of a hybrid composite system in conjunction with helical fibers. The hybrid system gives the rebar its initial stiffness and enables pseudo-yielding at lower strains. As the strain increase, the load is gradually transferred from the hybrid core to the helical fibers, which enables the rebar to undergo large elongations before failure. Embedded fiber optic sensors in the rebar can be used for health monitoring over a long period of time. The proof of concept and preliminary test results are described in the paper.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. K. Krishnamoorthy, R. K. Krishnamoorthy, Abdeldjelil Belarbi, Abdeldjelil Belarbi, K. Chandrashekhara, K. Chandrashekhara, Steve E. Watkins, Steve E. Watkins, } "Hybrid composite rebars for smart concrete structures", Proc. SPIE 3043, Smart Structures and Materials 1997: Smart Systems for Bridges, Structures, and Highways, (23 May 1997); doi: 10.1117/12.274631; https://doi.org/10.1117/12.274631
PROCEEDINGS
7 PAGES


SHARE
Back to Top