Paper
23 May 1997 Comparison of vibration control by confinement to conventional active vibration control methods
William W. Clark, Fangning Sun, David J. Tarnowski
Author Affiliations +
Abstract
The primary objective of this work is to determine to what extent vibration confinement can be used to enhance conventional active vibration control methods. By using a fixed-pinned beam with an attached elastic component, this objective was accomplished by applying active control to suppress vibrations in the component while the beam is under confined and unconfined conditions. Confinement was achieved by passively tuning linear and torsional stiffnesses of an elastic intermediate support, which alter the system's mode shapes. Four different active control methods were studied, including optimal control, adaptive feedforward cancellation, direct velocity feedback, and active isolation. The results show that passive confinement can significantly improve the performance of all four vibration control methods while simultaneously reducing their power requirements.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William W. Clark, Fangning Sun, and David J. Tarnowski "Comparison of vibration control by confinement to conventional active vibration control methods", Proc. SPIE 3044, Smart Structures and Materials 1997: Industrial and Commercial Applications of Smart Structures Technologies, (23 May 1997); https://doi.org/10.1117/12.274689
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Active vibration control

Vibration control

Feedback control

Adaptive control

Active isolation

Beam shaping

Back to Top