Overview of micromachined platforms for thermal sensing and gas detection

Ronald P. Manginell; James H. Smith; Antonio J. Ricco

doi:10.1117/12.276616

19 June 1997 Overview of micromachined platforms for thermal sensing and gas detection

Ronald P. Manginell, James H. Smith, Antonio J. Ricco

Proceedings Volume 3046, Smart Structures and Materials 1997: Smart Electronics and MEMS; (1997) https://doi.org/10.1117/12.276616
Event: Smart Structures and Materials '97, 1997, San Diego, CA, United States

Abstract

Micromachined hotplates, membranes, filaments, and cantilevers have all been used as platforms for thermal sensing and gas detection. Compared with conventional devices, micromachined sensors are characterized by low power consumption, high sensitivity, and fast response time. Much of these gains can be attributed to the size reductions achieved by micromachining. In addition, micromachining permits easy, yet precise tailoring of the heat transfer characteristics of these devices. By simple alterations in device geometry and materials used, the relative magnitudes of radiation, convection and conduction losses and Joule heat gains can be adjusted, and in this way device response can be optimized for specific applications. The free- standing design of micromachined platforms, for example, reduces heat conduction losses to the substrate, thereby making them attractive as low-power, fast-response heaters suitable for a number of applications. However, while micromachining solves some of the heat transfer problems typical of conventionally produced devices, it introduces some of its own. These trade-offs will be discussed in the context of several micromachined thermal and gas sensors described in the literature. These include micromachined flow sensors, gas thermal conductivity sensors, pressure sensors, uncooled IR sensors, metal-oxide and catalytic/calorimetric gas sensors. Recent results obtained for a microbridge-based catalytic/calorimetric gas sensor will also be presented as a means of further illustrating the concepts of thermal design in micromachined sensors.

Citation Download Citation

Ronald P. Manginell, James H. Smith, and Antonio J. Ricco "Overview of micromachined platforms for thermal sensing and gas detection", Proc. SPIE 3046, Smart Structures and Materials 1997: Smart Electronics and MEMS, (19 June 1997); https://doi.org/10.1117/12.276616

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available