Translator Disclaimer
8 December 1997 Sol-gel-derived and base-heat-treated AR coatings for-high power laser systems
Author Affiliations +
Proceedings Volume 3047, Solid State Lasers for Application to Inertial Confinement Fusion: Second Annual International Conference; (1997) https://doi.org/10.1117/12.294332
Event: Second International Conference on Solid State Lasers for Application to ICF, 1996, Paris, France
Abstract
Sol-gel derived and base-heat treated antireflective (AR) coatings with good abrasive/scratch resistant performance have been investigated and developed. The comparison of abrasive/scratch resistant property of the AR coatings from this method to that from other methods demonstrated that the base-heat treated AR coatings have still more abrasive/scratch resistant ability. After more than 30 times of drag wipe and 1000 times flashlamp glow discharges of 300 microsecond(s) duration and 15 J/cm2 for each discharge, the AR- coatings indicated no visible crazing or peeling. In the mean time, more than 6% transmission gain related to the spectrum of Nd+3 absorption can be obtained and maintained.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiamiao Tang and Congshan Zhu "Sol-gel-derived and base-heat-treated AR coatings for-high power laser systems", Proc. SPIE 3047, Solid State Lasers for Application to Inertial Confinement Fusion: Second Annual International Conference, (8 December 1997); https://doi.org/10.1117/12.294332
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top