Translator Disclaimer
7 July 1997 Achieving sub-half-micron i-line manufacturability through automated OPC
Author Affiliations +
Abstract
We present results of a verification study of totally automated optical proximity correction (OPC) for mask redesign to enhance process capability. OPC was performed on an aggressive 0.35 micrometer i-line LSI logic SRAM design using the automated OPC generation code Eoptimask, employing the aerial image simulation code FAIM, both from Vector Technologies, Inc. Three different tests were performed, varying in the aggressiveness and type of corrections made. The key issues addressed in this work are the predictive capability of the aerial image simulation and, particularly, the ability of automatically generated OPC to significantly improve the fidelity of the final printed resist image for different geometries. The results of our study clearly demonstrate the utility of automated OPC based on aerial image simulation. Key experimental results include: two-fold increase of depth of focus latitude; demonstration of the feasibility of full off-axis illumination on the stepper; successful resolution of different feature types (posts, lines and spaces) on the wafer to correct CD at a single common exposure and focus condition. Future research will address detailed issues in reticle manufacture and inspection which are critical for cost-effective large-scale OPC.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mario S. Garza, Eric Jackson, Wayne P. Shen, Nicholas K. Eib, Saeed Sabouri, Uwe Hollerbach, Theron L. Felmlee, Vijaya N.V. Raghavan, K. C. Wang, Eytan Barouch, Steven A. Orszag, Keith K. Chao, and John Jensen "Achieving sub-half-micron i-line manufacturability through automated OPC", Proc. SPIE 3048, Emerging Lithographic Technologies, (7 July 1997); https://doi.org/10.1117/12.275804
PROCEEDINGS
14 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Minimizing yield-loss risks through post-OPC verification
Proceedings of SPIE (October 19 2006)
Mask making: today's enabling technology
Proceedings of SPIE (December 06 1994)
Design, mask, and manufacturability
Proceedings of SPIE (December 05 2004)

Back to Top