Translator Disclaimer
Paper
7 July 1997 Dependence of optical constants of AZ BARLi bottom coating on bake conditions
Author Affiliations +
Abstract
The optical constants of AZRBARLiTM bottom coat have been determined by spectroscopic ellipsometry as a function of bake conditions. Cauchy parameters are reported as a function of bake conditions for three film thicknesses, corresponding to the first three minima of the reflectivity versus AZRBARLiTM film thickness curve. Full dispersion curves were obtained for constant spin speed and constant thickness conditions. It is found that the k dispersion curves show a slope change at 160 - 170 degrees Celsius bake temperature which is tentatively attributed to dye depletion and the formation of a graded layer in the bottom coat.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ralph R. Dammel, John P. Sagan, and Ron A. Synowicki "Dependence of optical constants of AZ BARLi bottom coating on bake conditions", Proc. SPIE 3049, Advances in Resist Technology and Processing XIV, (7 July 1997); https://doi.org/10.1117/12.275896
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

J Black a stray light coating for optical and...
Proceedings of SPIE (July 22 2016)
The Use Of An IBM PC For Maximizing Production In...
Proceedings of SPIE (October 13 1986)
Design principles for broadband AR coatings
Proceedings of SPIE (September 25 2008)
Developing polymeric antireflective coatings
Proceedings of SPIE (September 09 2008)
Temperature field design of optical thin film coatings
Proceedings of SPIE (May 13 1997)

Back to Top