Effects of crosslinking agent on lithographic performance of negative-tone resists based on poly(p-hydroxystyrene)

Qinghuang Lin; Ahmad D. Katnani; C. Grant Willson

doi:10.1117/12.275897

7 July 1997 Effects of crosslinking agent on lithographic performance of negative-tone resists based on poly(p-hydroxystyrene)

Qinghuang Lin, Ahmad D. Katnani, C. Grant Willson

Author Affiliations +

Proceedings Volume 3049, Advances in Resist Technology and Processing XIV; (1997) https://doi.org/10.1117/12.275897
Event: Microlithography '97, 1997, Santa Clara, CA, United States

Abstract

The effects of crosslinking agent on the lithographic performance of negative-tone resists based on poly(p- hydroxystyrene) (PHOST) have been investigated. Two crosslinking agents were used in the model resist systems: tetramethoxymethyl glycouril and 2,6-bis(acetoxymethyl) p- cresol. The resist containing tetramethoxymethyl glycouril shows better lithographic performance than the one with 2,6- bis(acetoxymethyl) p-cresol including better resolution, higher sensitivity, larger dissolution contrast, and less resist loss in the exposed regions during development. To reveal the origin of the difference in the lithographic performance, ¹³C NMR, FT-IR and differential scanning calorimetry (DSC) were employed to elucidate the crosslinking mechanisms, thermally induced crosslinking, the resulting network structure, and the crosslinking kinetics of the PHOST reaction with the two crosslinking agents. ¹³C NMR studies of model compound reactions suggest that the crosslinking of PHOST by tetramethoxymethyl glycouril proceeds via O- alkylation of the phenolic ring in the polymer, whereas the crosslinking of PHOST by 2,6-bis(acetoxymethyl) p-cresol proceeds via C-alkylation at the ortho carbon position of the phenolic ring. FT-IR studies indicate that there exists significant thermally induced crosslinking in the resist using 2,6-bis(acetoxymethyl) p-cresol as the crosslinking agent, while there is no detectable thermal crosslinking in the resist with tetramethoxymethyl glycouril as the crosslinking agent. The FT-IR results also show that the extent of crosslinking depends heavily on the crosslinking agent loading and the processing conditions. The effects of crosslinking chemistry on the crosslinked network structure and the lithographic performance of the two resists are discussed.

Citation Download Citation

Qinghuang Lin, Ahmad D. Katnani, and C. Grant Willson "Effects of crosslinking agent on lithographic performance of negative-tone resists based on poly(p-hydroxystyrene)", Proc. SPIE 3049, Advances in Resist Technology and Processing XIV, (7 July 1997); https://doi.org/10.1117/12.275897

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available