Translator Disclaimer
Paper
7 July 1997 Process effects resulting from an increased BARC thickness
Author Affiliations +
Abstract
Process improvements attributed to the use of bottom anti- reflective coatings (B.A.R.C.s) are well documented. As our experience with these materials improves, so does our understanding of additional optimization. Recent supplier experiments suggest an increase in the thickness of AZR BARLiTM (bottom anti-reflective layer i-line) solution to reduce photoresist swing curve ratios. Also, changes in thin film stack on common substrates can adversely affect the degree of photoresist reflective notching. It is therefore of extreme importance to determine optimum thickness(es) of a B.A.R.C. material to ensure maximum process potential. We document several process effects in the conversion of a SRAM test device (0.38 - 0.45 micrometers) from a 650 angstrom to a 2000 angstrom BARLiTM film thickness using conventional i-line photolithography. Critical dimension (CD) uniformity and depth of focus (DOF) are evaluated. Defect density between the two processes are compared before and after etch employing optical metrology and electrical test structures. Sensitivity of overlay as a function of BARLiTM film thickness is investigated as well.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ronald J. Eakin, Shangting F. Detweiler, Gregory J. Stagaman, Mark R Tesauro, Mark A. Spak, and Ralph R. Dammel "Process effects resulting from an increased BARC thickness", Proc. SPIE 3049, Advances in Resist Technology and Processing XIV, (7 July 1997); https://doi.org/10.1117/12.275841
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top