7 July 1997 Reliability studies of 1-kHz KrF excimer lasers for DUV lithography
Author Affiliations +
Proceedings Volume 3051, Optical Microlithography X; (1997); doi: 10.1117/12.276049
Event: Microlithography '97, 1997, Santa Clara, CA, United States
Abstract
Chip makers are gearing up for 686-class micro-processors and 64 Mb production. These require producing < 0.30 micrometers critical features. They are also focusing on 256 Mb DRAMs that require below 0.25 micrometers design rules. Therefore, the shift from mercury lamp based i-line to 248 nm Deep-Ultra- Violet (DUV) steppers has begun in earnest. Current KrF laser models from several suppliers satisfy the optical requirements necessary for pilot production. However, as the move from DUV lithography R&D environment to production occurs, the laser's manufacturability, uptime requirements and cost-of-operation (CoO) become more demanding. The chip maker requires reliability, availability and maintainability data from laser manufacturers to support uptime and CoO estimates. Often, such data are required long before the lasers actually go into production.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Palash P. Das, Hilary Heinmets, Cynthia A. Maley, Igor V. Fomenkov, Ray Cybulski, Donald G. Larson, "Reliability studies of 1-kHz KrF excimer lasers for DUV lithography", Proc. SPIE 3051, Optical Microlithography X, (7 July 1997); doi: 10.1117/12.276049; https://doi.org/10.1117/12.276049
PROCEEDINGS
7 PAGES


SHARE
KEYWORDS
Deep ultraviolet

Lithography

Reliability

Excimer lasers

Laser manufacturing

Manufacturing

Lamps

Back to Top