7 July 1997 Simulation of reflective notching with TEMPEST
Author Affiliations +
Proceedings Volume 3051, Optical Microlithography X; (1997); doi: 10.1117/12.276039
Event: Microlithography '97, 1997, Santa Clara, CA, United States
Abstract
Reflective notching from projection printing a narrow feature over a reflective topography was simulated with the 3D electro-magnetic simulation program TEMPEST. Various topographical and optical parameters were varied to determine their effect on the reflective notching and to gain insight into the mechanism of reflective notching. It was determined that corner angles in the topography and anti-reflection coating use are important parameters while resist surface angle and polarization are not.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas V. Pistor, Andrew R. Neureuther, "Simulation of reflective notching with TEMPEST", Proc. SPIE 3051, Optical Microlithography X, (7 July 1997); doi: 10.1117/12.276039; https://doi.org/10.1117/12.276039
PROCEEDINGS
11 PAGES


SHARE
KEYWORDS
Reflectivity

3D printing

Antireflective coatings

Polarization

Printing

Back to Top