7 July 1997 Understanding across-chip line-width variation: the first step toward optical proximity correction
Author Affiliations +
The prerequisite to successful optical proximity correction is an in depth understanding of the relevant parameters leading to patterning inaccuracies. The work presented in this paper is based on a test chip specifically designed to investigate sources of 1D line width errors, deemed the most critical for optical proximity correction. Data are presented relating line width errors to pitch and pattern density and highlighting the complex interactions between these two main contributors of line width error. The goal of this paper is not to derive a mathematical model for line width variation in etched polysilicon line structures but merely to qualitatively bound the complex interaction of pitch and pattern density based line width variation. The results of this investigation indicate that pattern density has a very significant effect on line width and that lithography, not just reactive ion etch, is significantly impacted by pattern density.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lars W. Liebmann, Lars W. Liebmann, Antoinette F. Molless, Antoinette F. Molless, Richard A. Ferguson, Richard A. Ferguson, Alfred K. K. Wong, Alfred K. K. Wong, Scott M. Mansfield, Scott M. Mansfield, } "Understanding across-chip line-width variation: the first step toward optical proximity correction", Proc. SPIE 3051, Optical Microlithography X, (7 July 1997); doi: 10.1117/12.276015; https://doi.org/10.1117/12.276015


Multiple-stage optical proximity correction
Proceedings of SPIE (June 25 2003)
Lithography budget analysis at the process module level
Proceedings of SPIE (March 20 2006)
100-nm node lithography with KrF?
Proceedings of SPIE (September 13 2001)

Back to Top