Paper
4 March 1982 Laboratory And Field Portable System For Calibrating Airborne Multispectral Scanners
William W. Kuhlow
Author Affiliations +
Abstract
Manufacturers of airborne multispectral scanners suggest procedures for calibration and alignment that are usually awkward and even questionable. For example, the procedures may require: separating the scanner from calibration and alignment sources by 100 feet or more, employing folding mirrors, tampering with the detectors after the procedures are finished, etc. Under the best of conditions such procedures require about three hours yielding questionable confidence in the results; under many conditions, however, procedures commonly take six to eight hours, yielding no satisfactory results. EG&G, Inc. has designed and built a calibration and alignment system for airborne scanners which solves those problems, permitting the procedures to be carried out in about two to three hours. This equipment can be quickly disassembled, transported with the scanner in all but the smallest single enaine aircraft, and reassembled in a few hours. The subsystems of this equipment are commonly available from manufacturers of optical and electronic equipment. The other components are easily purchased, or fabricated.
© (1982) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William W. Kuhlow "Laboratory And Field Portable System For Calibrating Airborne Multispectral Scanners", Proc. SPIE 0308, Contemporary Infrared Standards and Calibration, (4 March 1982); https://doi.org/10.1117/12.932792
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Scanners

Calibration

Signal detection

Head

Manufacturing

Oscilloscopes

RELATED CONTENT


Back to Top