Translator Disclaimer
4 April 1997 Experimental study of cutting thick aluminum and steel with a chemical oxygen-iodine laser using an N2 or O2 gas assist
Author Affiliations +
Proceedings Volume 3092, XI International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference; (1997) https://doi.org/10.1117/12.270182
Event: XI International Symposium on Gas Flow and Chemical Lasers and High Power Laser Conference, 1996, Edinburgh, United Kingdom
Abstract
A chemical oxygen-iodine laser (COIL) was used for cutting aluminum and carbon steel. Cut depths of 20 mm were obtained in aluminum and 41 mm in carbon steel using an N2 gas assist and 5 - 6 kW of power on target. The same laser at the same power level produced a cut depth of 65 mm in carbon steel with an O2 gas assist; a low quality cut to a depth of nearly 100 mm in carbon steel was demonstrated. These data are compared with existing COIL and carbon-dioxide laser cutting data. COIL cuts carbon steel and stainless steel at approximately the same rate. For a given cut depth, power and spot size, COIL cuts steel approximately three times faster than a carbon-dioxide laser using an inert gas assist. COIL cutting speeds in carbon steel are improved by approximately a factor of three when an O2 assist is used in lieu of an N2 gas assist. With an N2 gas assist, COIL cuts aluminum at approximately the same rate as carbon-dioxide cuts steel. To improve the agreement between data and an existing theoretical cutting model, an empirical correction factor was added to the model; this modification provides excellent agreement with data.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David L. Carroll and James A. Rothenflue "Experimental study of cutting thick aluminum and steel with a chemical oxygen-iodine laser using an N2 or O2 gas assist", Proc. SPIE 3092, XI International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference, (4 April 1997); https://doi.org/10.1117/12.270182
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top