18 August 1997 Application of a high-power diode laser for laser bending
Author Affiliations +
Proceedings Volume 3097, Lasers in Material Processing; (1997) https://doi.org/10.1117/12.281137
Event: Lasers and Optics in Manufacturing III, 1997, Munich, Germany
This paper gives an account of the first application of a high-power diode laser system for laser bending of sheet metals. The applied diode laser has an power output of 100 Watt at a wavelength of 810 nm. Sheet metals of AlMg3, St 14 and stainless steel have been investigated. The results show that it is possible to bend sheets with a thickness of up to 2 mm. The paper shows the correlation between the obtained bend angle and the investigated parameters like path feed rate, number of irradiations, sheet material and sheet thickness. An estimate of the range of application of the diode laser for laser bending has been derived from the determined results.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Daniela Lopez Cutino, Daniela Lopez Cutino, Joerg Dubslaff, Joerg Dubslaff, Roland Hoefling, Roland Hoefling, Petra Aswendt, Petra Aswendt, } "Application of a high-power diode laser for laser bending", Proc. SPIE 3097, Lasers in Material Processing, (18 August 1997); doi: 10.1117/12.281137; https://doi.org/10.1117/12.281137


Teradiode's high brightness semiconductor lasers
Proceedings of SPIE (April 22 2016)
DPSSL and FL pumps based on 980 nm telecom pump...
Proceedings of SPIE (June 01 2004)
Operating temperature of diode-pumped alkali vapor laser
Proceedings of SPIE (February 06 2008)
CW to QCW power scaling of high-power laser bars
Proceedings of SPIE (February 17 2010)

Back to Top