1 November 1997 Comparison of materials for use in the precision grinding of optical components
Author Affiliations +
Precision grinding of optical components is becoming an accepted practice for rapidly and deterministically fabrication optical surface to final or near-final surface finish and figure. In this paper, a comparison of grinding techniques and materials is performed. Flat and spherical surfaces were ground in three different substrate materials: BK7 glass, chemical vapor deposited silicon carbide ceramic, and sapphire. Spherical surfaces were used to determine the contouring capacity of the process, and flat surfaces were used for surfaces finish measurements. The recently developed Precitech Optimum 2800 diamond turning and grinding platform was used to grind surfaces in 40mm diameter substrates sapphire and silicon carbide substrates and 200 mm BK7 glass substrates using diamond grinding wheels. The results of this study compare the surface finish and figure for the three materials.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Boyd M. Evans, Boyd M. Evans, Arthur C. Miller, Arthur C. Miller, Charles M. Egert, Charles M. Egert, } "Comparison of materials for use in the precision grinding of optical components", Proc. SPIE 3134, Optical Manufacturing and Testing II, (1 November 1997); doi: 10.1117/12.295127; https://doi.org/10.1117/12.295127


The broad utility of Trizac diamond tile
Proceedings of SPIE (October 16 2017)
Grinding aspheric and freeform micro-optical molds
Proceedings of SPIE (March 07 2007)
The Optical Element Fabrication Process
Proceedings of SPIE (September 16 1980)
Precision Finishing Of Ceramics
Proceedings of SPIE (January 11 1987)

Back to Top