2 October 1997 Operation of electrochromic devices prepared by sol-gel methods
Author Affiliations +
Abstract
The manufacturing and operation of window size (30 cm by 90 cm) electrochromic devices is described. Both the electrochromic electrode (WO3) and the counter electrode (V2O5) were deposited by sol-gel method. Electrochromic measurements were performed on both electrodes and the complete device to correlate device performance to fabrication conditions. The paper describes the affects of temperature on the switching characteristics of electrochromic window. The devices were tested in the temperature range between 10 degrees Celsius and 50 degrees Celsius. The switching algorithm described in this paper ensures identical optical performance of electrochromic device in the wide range of temperatures. The algorithm is based on the charge control and does not require monitoring of device transmittance.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gavin Tulloch, Igor L. Skryabin, Graeme Evans, John M. Bell, "Operation of electrochromic devices prepared by sol-gel methods", Proc. SPIE 3136, Sol-Gel Optics IV, (2 October 1997); doi: 10.1117/12.284137; https://doi.org/10.1117/12.284137
PROCEEDINGS
7 PAGES


SHARE
Back to Top