Paper
26 September 1997 Calibration of optical components for the DS-1 space probe
Author Affiliations +
Abstract
The deep space one (DS-1) probe is a mini-tour photo reconnaissance mission of Earth-Mars space. Target bodies include an asteroid, a comet, and the planet Mars. Central to this mission is an accurate measurement of the reflectance of the primary mirror of the imaging system. Knowledge of this reflectance will allow calculation of the absolute albedos of the target bodies encountered. Scattering measurements were also made on the so-called 'diffuser plate' of the optical train. This component was intended to be used only for the solar occultation experiment which measures the solar intensity as a function of atmospheric depth as Mars comes between the Sun and the probes optical detectors. The diffuser plate was designed to reduce the solar intensity by scattering light in an isotropic fashion. However, it has been found that the diffuser plate is not an isotropic scatterer. This report describes the equipment used to make the reflectance and scattering measurements, as well as the results obtained from the measurement program.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard R. Zito "Calibration of optical components for the DS-1 space probe", Proc. SPIE 3141, Scattering and Surface Roughness, (26 September 1997); https://doi.org/10.1117/12.279245
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Scattering

Sensors

Reflectivity

Diffusers

Space reconnaissance

Scatter measurement

Light scattering

Back to Top