1 November 1997 Experimental shape optimization of bent crystals
Author Affiliations +
Abstract
We report on first results obtained with a novel, x-ray- based method that permits to correct residual slope errors of curved crystals to (mu) rad accuracy. It consists of two steps. The first is to measure the slope error very precisely, the second to shape the sides of the crystal plate to be bent according to the correction calculated from simple bending theory and thus to achieve a substantial improvement of the lattice plane slope error. The same technique can be applied to elastically bent mirrors or multilayers.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrich Lienert, Ulrich Lienert, Siegrid Hartlaub, Siegrid Hartlaub, Andreas K. Freund, Andreas K. Freund, } "Experimental shape optimization of bent crystals", Proc. SPIE 3152, Materials, Manufacturing, and Measurement for Synchrotron Radiation Mirrors, (1 November 1997); doi: 10.1117/12.295566; https://doi.org/10.1117/12.295566
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Challenges for synchrotron x-ray optics
Proceedings of SPIE (December 23 2002)
XTrace a new ray tracing tool for simulation of...
Proceedings of SPIE (September 17 2007)
High heat flux x ray monochromators what are the...
Proceedings of SPIE (December 10 1997)
New beamline optics of the x ray undulator BW1 at...
Proceedings of SPIE (November 21 1996)

Back to Top