1 January 1998 Manufacturing concepts and development trends in the industrial production of microelectromechanical systems
Author Affiliations +
Proceedings Volume 3202, Microrobotics and Microsystem Fabrication; (1998) https://doi.org/10.1117/12.298030
Event: Intelligent Systems and Advanced Manufacturing, 1997, Pittsburgh, PA, United States
Abstract
During the past few years, remarkable affords have been made for the realization of microscale sensors, actuators and microelectromechanical system. Due to advances in solid state and micromachining technologies, significant advances in designing, fabricating and testing of microminiaturized devices have been achieved at laboratory level. However, the technical and economical realization of microelectromechanical systems is considerably impeded by the lack of satisfying device technology for their industrial production. A production concept for the industrial production of hybrid microelectromechanical systems was developed and investigated. The concept is based on the resources and requirements of medium-sized enterprises and is characterized by its flexibility. Microsystem fabrication is separated into microfabrication steps performed in-house and technological steps performed by external technology providers. The modularity of the concept allows for a gradual increase in the degree of automation and the in-house production depth, depending on market capacity and financial resources. To demonstrate the feasibility of this approach, the design and realization of a microfabrication process center, which includes tasks like transport and handling, processing, cleaning, testing and storing are discussed. Special attention is given to the supply and feeding of microparts, to the necessary magazines, trays and transport systems, to the implementation of homogeneous mechanical, environmental and information interfaces, to the employment of advanced control, scheduling, and lot tracking concepts, and to the application of highly modular and cost-efficient clean production concepts.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthias Schuenemann, Matthias Schuenemann, Ralf Grimme, Ralf Grimme, Thomas Kaufmann, Thomas Kaufmann, Gerhard Schwaab, Gerhard Schwaab, Uwe Baeder, Uwe Baeder, Wolfgang Schaefer, Wolfgang Schaefer, Johann Dorner, Johann Dorner, } "Manufacturing concepts and development trends in the industrial production of microelectromechanical systems", Proc. SPIE 3202, Microrobotics and Microsystem Fabrication, (1 January 1998); doi: 10.1117/12.298030; https://doi.org/10.1117/12.298030
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

ASSET: collaboration in Europe on smart structures
Proceedings of SPIE (June 13 2001)
MEMS programs at DARPA
Proceedings of SPIE (September 30 2001)
Standards for hybrid microsystems production equipment
Proceedings of SPIE (October 07 2001)
Industry-university microassembly development initiatives
Proceedings of SPIE (September 28 1999)
Design rules for non-Manhattan shapes
Proceedings of SPIE (August 24 2000)

Back to Top