27 August 1997 Si selective epitaxial growth technology using UHV-CVD and its application to LSI fabrication
Author Affiliations +
Abstract
This paper describes Si or SiGe selective epitaxial growth (SEG) technology for the application to LSI fabrication. SEG has become one of the promising technologies, because this process realizes the self-aligned and the low-temperature in- situ doping process. Several advanced device structures have been proposed utilizing the SEG process advantages. However, there have been left several problems to be resolved in order to introduce this advanced process into the LSI fabrication. Wafer surfaces can not escape from the damage or contamination through the practical LSI fabrication process. The facet control or the fillings in the complex device structures are required. Several novel techniques of the surface treatment and the SEG conditions are introduced to overcome these problems. Some successful examples of SEG application are demonstrated to the advanced device structures, such as elevated S/Ds in MOS-FETs, contact fillings in DRAMs, and SiGe epi-base formation in high speed bipolar transistors, by an ultra-high vacuum chemical vapor deposition (UHV-CVD) system. For realizing future high density and high performance devices, which will require increasingly complex fabrication process, SEG will become one of the break-through technologies to ensure simpler processing.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seiichi Shishiguchi, Seiichi Shishiguchi, Tomoko Yasunaga, Tomoko Yasunaga, Tohru Aoyama, Tohru Aoyama, T. Tatsumi, T. Tatsumi, Shuichi Saito, Shuichi Saito, } "Si selective epitaxial growth technology using UHV-CVD and its application to LSI fabrication", Proc. SPIE 3212, Microelectronic Device Technology, (27 August 1997); doi: 10.1117/12.284582; https://doi.org/10.1117/12.284582
PROCEEDINGS
12 PAGES


SHARE
Back to Top