Application of COTS high-power laser diodes and driver for a free-space laser communication terminal

Eric Y. Chan; Jeff C. Adams; Jonathan M. Saint Clair; Kenneth A. Morrison; Martin Sosa

doi:10.1117/12.308713

27 May 1998 Application of COTS high-power laser diodes and driver for a free-space laser communication terminal

Eric Y. Chan, Jeff C. Adams, Jonathan M. Saint Clair, Kenneth A. Morrison, Martin Sosa

Proceedings Volume 3266, Free-Space Laser Communication Technologies X; (1998) https://doi.org/10.1117/12.308713
Event: Optoelectronics and High-Power Lasers and Applications, 1998, San Jose, CA, United States

Abstract

Recently, there has been strong interest in the application of commercial-off-the-shelf (COTS) electronic and optoelectronic (O/E) components for free space laser communication application. Besides the space qualified packaging issues, the main problems of using COTS O/E transmitter are: (1) Telecom grade laser transmitters do not have sufficient power to meet the free space laser communication requirements; (2) COTS laser diode transmitter driver circuits have limited peak drive current, usually below 100 mA, which is too low for driving high power laser diodes; and (3) COTS high power laser diodes are usually not used for high data rate applications since the high speed performance of the laser/driver combination is usually inadequate. In this paper we will present our latest study results on the SDL 5430 and SDL 580 high power laser diodes driven by high current laser drivers at data rates from 600 Mb/s to over 1 Gb/s. Several models from the HY6000 family of high current and high speed laser diode drivers from Hytek Microsystems Inc., designed for free space laser communication applications, have been tested with the SDL high power laser diodes. Using direct drive technique with NRZ modulation, average output power over 100 mW at 622 Mb/s were obtained with these low cost Hytek drivers. For data rates over 1 Gb/s, the parasitic associated with the laser diode becomes an important limitation factor. We have measured the capacitance of the SDL 5430 and the new junction up SDL 580 laser diodes, an equivalent circuit model is developed to examine the effect of these parasitics on the speed of the laser diode. The results are consistent with our experimental observations.

Citation Download Citation

Eric Y. Chan, Jeff C. Adams, Jonathan M. Saint Clair, Kenneth A. Morrison, and Martin Sosa "Application of COTS high-power laser diodes and driver for a free-space laser communication terminal", Proc. SPIE 3266, Free-Space Laser Communication Technologies X, (27 May 1998); https://doi.org/10.1117/12.308713

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available