26 March 1998 Single-layer color hologram recording
Author Affiliations +
Processing of color silver halide holographic materials is still the subject of laboratory studies rather then established technology. Therefore any new approaches to the problem would extend the understanding of the process. the article describes the chemical processing of color holograms recorded on PFG-03C plates that is supposed to be more adequate compared to formerly known ones. The processing employs the experience accumulated during years of work with Russian PE-2, PFG-03 and -03M emulsions and is the application of well known solution physical development to the case of color hologram recording. Once such color hologram is recorded, its optimal reconstruction conditions should be determined for proper color revision. This can be done through the analysis of the angular-spectral selectivity of the hologram.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vladimir B. Markov, Vladimir B. Markov, Andrey Nikolayevi Timoshenko, Andrey Nikolayevi Timoshenko, Gert von Bally, Gert von Bally, Frank Dreesen, Frank Dreesen, "Single-layer color hologram recording", Proc. SPIE 3294, Holographic Materials IV, (26 March 1998); doi: 10.1117/12.304532; https://doi.org/10.1117/12.304532


Red-sensitive photopolymer for holography
Proceedings of SPIE (April 23 1992)
Recent advances in holographic materials from Slavich
Proceedings of SPIE (October 02 2000)
Holographic Moire Contouring
Proceedings of SPIE (April 11 1990)
Improved processing for silver halide pulse holography
Proceedings of SPIE (April 21 1996)
Bleached Silver Halide Holographic Recording Materials
Proceedings of SPIE (March 30 1989)

Back to Top