Paper
29 June 1998 Evaluation of coma aberration in projection lens by various measurements
Takashi Saito, Hisashi Watanabe, Yoshimitsu Okuda
Author Affiliations +
Abstract
In this paper, evaluation of lens coma aberration in projection lens of a stepper by various measurement methods is described. The measurement methods were based on asymmetry of the printed images caused by coma aberration. We used three measurement methods. They are conventionally used method and two new methods. The three methods are: (a) measuring the CD difference between both ends of line-and-space, (b) observing the side lobe patterns using an attenuated phase shifting mask (a-PSM), and (c) measuring the registration error using overlay patterns that have assist patterns. These measurement patterns are printed on Si wafers by a KrF stepper (NA equals 0.55) with various (sigma) . The dependence of the feature size and (sigma) on the influence of coma aberration was easily measured by these methods. As each method has merits and demerits, proper use of each method is necessary. Then the influence of coma aberration was evaluated by method (a). The influence of coma aberration had two components and they were due to primary coma aberration and de-centering coma aberration respectively. We estimated the influence of coma aberration by simulation and got good agrement with the experimental results. The measurement methods we demonstrated here are applicable for lens evaluation of steppers by the users.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takashi Saito, Hisashi Watanabe, and Yoshimitsu Okuda "Evaluation of coma aberration in projection lens by various measurements", Proc. SPIE 3334, Optical Microlithography XI, (29 June 1998); https://doi.org/10.1117/12.310759
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monochromatic aberrations

Image quality

Optical testing

Overlay metrology

Image registration

Critical dimension metrology

Phase shifting

Back to Top