Translator Disclaimer
26 May 1998 Software integration at TNG and Active Optics: a practical example
Author Affiliations +
Abstract
Since March 1997, the TNG Telescope is int its Commissioning phase. In this paper, we describe the structure of the control software of TNG and the on-going activity of the software integration team. The Telescope Communication Network has been completely installed, the control software has been set up and the integration phase is currently in progress. The TNG control software has been designed having in mind the needs of a modern telescope control system: it is based on stable and widespread industry standards; its architecture is fully modular and intrinsically open in order to allow future enhancements and/or modifications of its components. Moreover, the code was written paying a particular attention to its portability. All these characteristics make the TNG control system open to future technology evolutions, both hardware and software-wise. The TNG control software provides a coherent environment where the information flow is constantly guided and controlled through its path across the system. Despite the multiplicity and non-homogeneity of the different subsystems, TNG provides the operator a common framework from the raw data gathering, to the real-time applications, up to the operator interface and archiving system. This was made designing and building a set of layers of increasing abstraction that were mapped onto the various physical components. A brief description of the steps followed during the integration of a number of subsystems will be given.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Claudio Vuerli, Carlotta Bonoli, Andrea Balestra, Andrea Baruffolo, Leonardo Corcione, D. Fantinel, Daniele Gardiol, P. Marcucci, Fabio Pasian, Claudio Pernechele, Mauro Pucillo, and Riccardo Smareglia "Software integration at TNG and Active Optics: a practical example", Proc. SPIE 3351, Telescope Control Systems III, (26 May 1998); https://doi.org/10.1117/12.308830
PROCEEDINGS
15 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Programmable workflow control with rule check on LAMOST
Proceedings of SPIE (July 19 2010)
Application of CORBA to the GTC control system
Proceedings of SPIE (June 15 2000)
Keck II Telescope Control System
Proceedings of SPIE (March 20 1997)
VLT telescope control software: an overview
Proceedings of SPIE (June 07 1995)
VST project: control software overview
Proceedings of SPIE (December 12 2002)

Back to Top