Paper
11 September 1998 Design of the first-generation wavefront sensor and actuator geometry for the 6.5-m MMT adaptive optical system
Author Affiliations +
Abstract
A description is given for the geometry of the first generation adaptive-optical (AO) system being developed for the 6.5m single-mirror telescope that will replace the Multiple Mirror Telescope on Mt. Hopkins. The AO system consists of an adaptive secondary mirror with 330-actuators and a wave front senor composed of a 13 by 13 square subaperture array. The deformable mirror actuator vibrational modes were determined from a finite element model of the adaptive-secondary mirror. Numerical simulations in based on the finite element results were carried out to determine the expected performance of the system. Two reconstruction algorithms were compared - a least squares reconstructor and a modal equalization technique developed for this AO geometry. Strehl ratios are reported for the two algorithms for various guide star magnitudes and number of corrected wave front modes.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Troy A. Rhoadarmer, Patrick C. McGuire, Michael Lloyd-Hart, James Roger P. Angel, Brian Cuerden, Bruce C. Fitz-Patrick, and David G. Sandler "Design of the first-generation wavefront sensor and actuator geometry for the 6.5-m MMT adaptive optical system", Proc. SPIE 3353, Adaptive Optical System Technologies, (11 September 1998); https://doi.org/10.1117/12.321715
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Adaptive optics

Mirrors

Wavefronts

Telescopes

Finite element methods

Reconstruction algorithms

RELATED CONTENT

OWL phase A status report
Proceedings of SPIE (September 28 2004)
A Near Infrared Astronomical Adaptive Optics System
Proceedings of SPIE (September 20 1989)
Johns Hopkins adaptive optics coronagraph
Proceedings of SPIE (December 01 1991)
Design considerations for CELT adaptive optics
Proceedings of SPIE (July 20 2000)

Back to Top