9 July 1998 Image motion and flexure compensation of the FORS spectrographs
Author Affiliations +
Abstract
One of the most critical issues in designing a spectrograph is the motion of opto-mechanical components due to flexure especially when it will be mounted to the Cassegrain focus of a telescope. Image motion on the detector has to be kept small in order not to affect the value of the scientific data. The FORS spectrographs fulfil those requirements by a proper design and by a passive compensation of the instrumental flexure. Image motion of the 2 metric tons instrument could be reduced in this way to a tiny fraction of one pixel's size thus not affecting the data gathered with those spectrographs. It is tested and approved at a telescope simulator that all specifications regarding those motions are fully met. A fine tuning flexure compensation is built into the spectrograph's design and is tested on its tuning range which allows to adapt the compensation to effects eventually caused by the Cassegrain flange of the telescope.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Harald E. Nicklas, Harald E. Nicklas, Hermann Boehnhardt, Hermann Boehnhardt, Walter Fuertig, Walter Fuertig, Reiner Harke, Reiner Harke, Hans-Joachim Hess, Hans-Joachim Hess, Peter Juergens, Peter Juergens, Bernard Muschielok, Bernard Muschielok, Walter Seifert, Walter Seifert, Otmar Stahl, Otmar Stahl, Karl Tarantik, Karl Tarantik, } "Image motion and flexure compensation of the FORS spectrographs", Proc. SPIE 3355, Optical Astronomical Instrumentation, (9 July 1998); doi: 10.1117/12.316810; https://doi.org/10.1117/12.316810
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

MEGARA: a new generation optical spectrograph for GTC
Proceedings of SPIE (July 08 2014)
Integrating the HERMES spectrograph for the AAT
Proceedings of SPIE (October 05 2012)
FUEGOS status report
Proceedings of SPIE (March 21 1997)

Back to Top