Translator Disclaimer
31 July 1998 Bolocam: a millimeter-wave bolometric camera
Author Affiliations +
Abstract
We describe the design of Bolocam, a bolometric camera for millimeter-wave observations at the Caltech Submillimeter Observatory. Bolocam will have 144 diffraction-limited detectors operating at 300 mK, an 8 arcminute field of view, and a sky noise limited NEFD of approximately 35 mJy Hz-1/2 per pixel at (lambda) equals 1.4 mm. Observations will be possible at one of (lambda) equals 1.1., 1.4, or 2.1 mm per observing run. The detector array consists of sensitive NTD Ge thermistors bonded to silicon nitride micromesh absorbers patterned on a single wafer of silicon. This is a new technology in millimeter-wave detector array construction. To increase detector packing density, the feed horns will be spaced by 1.26 f(lambda) (at (lambda) equals 1.4 mm), rather than the conventional 2 f(lambda) . DC stable read out electronics will enable on-the-fly mapping and drift scanning. We will use Bolocam to map Galactic dust emission, to search for protogalaxies, and to observe the Sunyaev- Zel'dovich effect toward galaxy clusters.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jason Glenn, James J. Bock, Goutam Chattopadhyay, Samantha F. Edgington, Andrew E. Lange, Jonas Zmuidzinas, Philip D. Mauskopf, Brooks Rownd, Lunming Yuen, and Peter A. R. Ade "Bolocam: a millimeter-wave bolometric camera", Proc. SPIE 3357, Advanced Technology MMW, Radio, and Terahertz Telescopes, (31 July 1998); https://doi.org/10.1117/12.317418
PROCEEDINGS
9 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

HAWC: a far-infrared camera for SOFIA
Proceedings of SPIE (June 19 2000)
Ground-based commissioning of FLITECAM
Proceedings of SPIE (July 08 2008)
The large APEX bolometer camera LABOCA
Proceedings of SPIE (July 17 2008)

Back to Top