Laser micromachining of silicon: a new technique for fabricating terahertz imaging arrays

Christopher K. Walker; Aimee L. Hungerford; Gopal Narayanan; Christopher E. Groppi; Theodore M. Bloomstein; Stephen T. Palmacci; Margaret B. Stern; Jane E. Curtin

doi:10.1117/12.317377

31 July 1998 Laser micromachining of silicon: a new technique for fabricating terahertz imaging arrays

Christopher K. Walker, Aimee L. Hungerford, Gopal Narayanan, Christopher E. Groppi, Theodore M. Bloomstein, Stephen T. Palmacci, Margaret B. Stern, Jane E. Curtin

Author Affiliations +

Proceedings Volume 3357, Advanced Technology MMW, Radio, and Terahertz Telescopes; (1998) https://doi.org/10.1117/12.317377
Event: Astronomical Telescopes and Instrumentation, 1998, Kona, HI, United States

Abstract

One of the main obstacles encountered in designing low noise, high efficiency, heterodyne receivers and local oscillator sources at submillimeter wavelengths is the quality and cost of waveguide structures. At wavelengths shorter than 400 micrometers, rectangular waveguide structures, feed-horns, and backshorts become extremely difficult to fabricate using standard machining techniques. We have used a new laser milling technique to fabricate high quality, THz waveguide components and feedhorns. Once metallized, the structures have the properties of standard waveguide components. Unlike waveguide components made using silicon wet-etching techniques, laser-etched components can have almost any cross section, from rectangular to circular. Under computer control, the entire waveguide structure (including the corrugated feedhorn a submillimeter-wave mixer or multiplier can be fabricated to micrometer tolerances in a few hours. Laser etching permits the direct scaling of successful waveguide multiplier and mixer designs to THz frequencies. Since the entire process is computer controlled, the cost of fabricating submillimeter waveguide components is significantly reduced. With this new laser etching process, the construction of high performance waveguide array receivers at THz frequencies becomes tractable. In this paper we will describe the laser etching technique and discuss how it can be used to construct THz imaging arrays. We will also describe the construction of a prototype 810 GHz mixer which utilizes these new construction techniques.

Citation Download Citation

Christopher K. Walker, Aimee L. Hungerford, Gopal Narayanan, Christopher E. Groppi, Theodore M. Bloomstein, Stephen T. Palmacci, Margaret B. Stern, and Jane E. Curtin "Laser micromachining of silicon: a new technique for fabricating terahertz imaging arrays", Proc. SPIE 3357, Advanced Technology MMW, Radio, and Terahertz Telescopes, (31 July 1998); https://doi.org/10.1117/12.317377

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available