Aircraft reconnaissance operators need to access increasing amounts of information to perform their job effectively. Unfortunately, there is no excess weight, space or power capacity in most airborne platforms for the installation of additional display surfaces. Head mounted workstation displays solve these weight, space and power problems and mitigate information overload by providing a user-friendly interface to displayed information. Savings can be tremendous for large platforms. Over 18 kW of power and over 5,000 pounds could be saved on each Rivet Joint or AWACS platform. Even small platforms such as the E-2C or UAV ground control stations benefit from removal of large, heavy CRT or LCD displays. In addition, head mounted workstation displays provide an increased capability for collaborative mission planning and reduce motion-induced nausea. Kaiser Electronics has already designed and demonstrated a prototype system, VIEWTM, that addresses the needs of the airborne workstation operator. This system is easily reconfigured for multiple tasks and can be designed as a portable workstation for use anywhere within the aircraft (especially for maintenance or supervisory roles). We have validated the VIEWTM design with hundreds of user trials within the airborne reconnaissance community. Adopting such a display system in reconnaissance aircraft will gain significant benefits such as longer on-station time, increased operational altitude and improved operator performance.