Paper
31 March 1998 Acoustic microscopy for evaluating cracks produced by CO2 laser shaping of thin alumina plates
Author Affiliations +
Abstract
The shaping of thin alumina ceramic plates with lasers appears to be an advantageous method for manufacturing. Unfortunately the failure rate is high because of crack initiation during the application of the high power laser. We have begun to address the issue of crack initiation by the use of in-process and post-process analysis. Here we present our results on the evaluation of cracks by optical, scanning laser, scanning electron and scanning acoustic microscopy. We present images of surface and subsurface micro-cracks generated at different power levels of our high power CO2 system. The spatial variation of the Rayleigh wave velocity is measured by the V(z) curve technique. These preliminary data suggest that with improvement the V(z) technique may provide residual stress variation with high spatial resolution. The evaluation described should lead to insight into the fracture mechanism and eventually provide guidance for the choice of laser parameters (e.g., power, focus, scanning rate, emitting duration, or the like).
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chiaki Miyasaka, Mustafa Aslan, and Bernhard R. Tittmann "Acoustic microscopy for evaluating cracks produced by CO2 laser shaping of thin alumina plates", Proc. SPIE 3396, Nondestructive Evaluation of Materials and Composites II, (31 March 1998); https://doi.org/10.1117/12.301526
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Acoustics

Scanning electron microscopy

Microscopes

Carbon dioxide lasers

Ceramics

Microscopy

Laser optics

Back to Top