You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
11 December 1982Fiber Optic Component Tests In High Speed Data Bus Applications
A series of tests was performed to evaluate off-the-shelf components for the design of a fiber optic channel for the Nascom System Improvements Project in support of the NASA Goddard Space Flight Center. This paper describes the results of this series of tests, establishing operational performance of active and passive fiber optic components at data rates up to 150 Mb/s. These tests determine the transmission characteristics of the fiber optic transmitters and receivers and the effects of data rate, bit pattern sensitivity, and vestigial optical energy on the performance of these devices. Tests were also performed to evaluate the capability of fused biconical couplers to Function properly at these high data rates.
The alert did not successfully save. Please try again later.
R. Creswell, M. D. Drake, C. R. Husbands, "Fiber Optic Component Tests In High Speed Data Bus Applications," Proc. SPIE 0340, Future Trends in Fiber Optic Communications, (11 December 1982); https://doi.org/10.1117/12.933669