19 June 1998 Tunable chirped fiber Bragg grating embedded in a textile laminated beam for fiber dispersion compensation
Author Affiliations +
Proceedings Volume 3420, Optical Fiber Communication; (1998) https://doi.org/10.1117/12.312855
Event: Asia Pacific Symposium on Optoelectronics '98, 1998, Taipei, Taiwan
Abstract
A simple method is reported for transformation of a uniform fiber grating into a linear chirped grating and realization of independent tuning of grating's linear chirp degree and central wavelength. This method involves embedding a uniform grating into a textile laminated beam and creating an odd- symmetrical linear strain distribution along the grating versus its center with a three-point-bending and stretching setup. The grating's central wavelength and chirp degree can be tuned by adjusting the horizontal stretching range and vertical bending displacement on the beam independently. A simulated experiment for compensating the dispersion of a standard single-mode fiber over 100km for 10Gbit/s signal at 1550nm window is successfully demonstrated using such a tunable chirped grating with 10 cm in length.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weichong Du, Weichong Du, W. P. Liu, W. P. Liu, David G. Du, David G. Du, Hwa-Yaw Tam, Hwa-Yaw Tam, Xiaoming Tao, Xiaoming Tao, ChongXiu Yu, ChongXiu Yu, Shong Hao Liu, Shong Hao Liu, } "Tunable chirped fiber Bragg grating embedded in a textile laminated beam for fiber dispersion compensation", Proc. SPIE 3420, Optical Fiber Communication, (19 June 1998); doi: 10.1117/12.312855; https://doi.org/10.1117/12.312855
PROCEEDINGS
6 PAGES


SHARE
Back to Top