Paper
8 October 1998 AC phase measuring interferometer for measuring dn/dT of fused silica and calcium fluoride at 193 nm
Author Affiliations +
Abstract
A novel method for the measurement of the change in index of refraction vs. temperature (dn/dT) of fused silica and calcium fluoride at the 193 nm wavelength has been developed in support of thermal modeling efforts for the development of 193 nm-based photolithographic exposure tools. The method, based upon grating lateral shear interferometry, uses a transmissive linear grating to divide a 193 nm laser beam into several beam paths by diffraction which propagate through separate identical material samples. One diffracted order passing through one sample overlaps the undiffracted beam from a second sample and forms interference fringes dependent upon the optical path difference between the two samples. Optical phase delay due to an index change from heating one of the samples causes the interference fringes to change sinusoidally with phase. The interferometer also makes use of AC phase measurement techniques through lateral translation of the grating. Results for several samples of fused silica and calcium fluoride are demonstrated.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard N. Shagam "AC phase measuring interferometer for measuring dn/dT of fused silica and calcium fluoride at 193 nm", Proc. SPIE 3425, Optical Diagnostic Methods for Inorganic Transmissive Materials, (8 October 1998); https://doi.org/10.1117/12.326662
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Diffraction gratings

Silica

Temperature metrology

Phase shifts

Calcium

Phase measurement

Back to Top