Paper
29 October 1998 Mirror telescope for long linear detector arrays
Michael Owen Lidwell
Author Affiliations +
Abstract
Detector developments raise the possibility of achieving high resolution images, employing linear arrays of over 3000 pixels, in any of the atmospheric windows extending from the visual to the far infra-red. Simultaneous capture with fusion of the VNIR, MWIR & LWIR images requires a reflective optical system. Reasons are given for the choice of a 4 mirror anastigmatic telescope for the basic imaging system which is combined with another 4 mirror afocal telescope to cover a 60 degree field in wide angle mode. To permit ground based trials, a mirror scanner covers a 40 degree field in either mode. Choice of a telescope with projected entrance pupil was essential for a compact system. Focus and mode changes are all made by the movement of flat mirrors. A particular arrangement of these folds contributes towards a rational structure with the mirror groups mounted on optical axes perpendicular to a common base. The methods used to ensure dimensional stability including the design and mounting of the beamsplitters are described.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Owen Lidwell "Mirror telescope for long linear detector arrays", Proc. SPIE 3429, Current Developments in Optical Design and Engineering VII, (29 October 1998); https://doi.org/10.1117/12.328541
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Telescopes

Relays

Beam splitters

Space telescopes

Sensors

Objectives

RELATED CONTENT


Back to Top