19 November 1998 Polycapillary conic collimator for micro-XRF
Author Affiliations +
In this paper a new method of micro-XRF will be presented. A polycapillary conic structure was used for collimation of the fluorescence radiation emitted by the sample. In spite of the usual method for realization of local analysis, in which the primary beam has to be collimated on the sample surface, the polycapillary conic collimator takes the fluorescence radiation from a local area and transports it to the detector. Under these conditions the primary beam may irradiate a large surface area at the sample. Therefore, also X-ray sources of moderate brilliance may be used in such an experimental set-up. A spatial resolution of about 20 micrometers can be achieved.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Aniouar A. Bzhaumikhov, Aniouar A. Bzhaumikhov, Norbert Langhoff, Norbert Langhoff, J. Schmalz, J. Schmalz, R. Wedell, R. Wedell, Valentin I. Beloglazov, Valentin I. Beloglazov, N. F. Lebedev, N. F. Lebedev, "Polycapillary conic collimator for micro-XRF", Proc. SPIE 3444, X-Ray Optics, Instruments, and Missions, (19 November 1998); doi: 10.1117/12.331258; https://doi.org/10.1117/12.331258


2D and 3D micro XRF based on polycapillary optics at...
Proceedings of SPIE (August 25 2015)
Use of x-ray optical systems in a small diffractometer
Proceedings of SPIE (November 18 1998)
STEND 70 multifunction arrangement for the x ray capillary...
Proceedings of SPIE (December 05 2006)
X-ray research system based on Kumakhov optics
Proceedings of SPIE (November 18 1998)
X-ray capillary system for hard x-ray astronomy
Proceedings of SPIE (November 18 1998)
Use of Kumakhov optics for x-ray analysis
Proceedings of SPIE (July 18 1996)

Back to Top