Translator Disclaimer
Paper
4 December 1998 Measurement of pump-induced thermal effect in Er/Yb codoped fiber
Author Affiliations +
Abstract
We report here the experimental results of pump-induced thermal effect in Er/Yb fibers. A 10-mm long fiber Bragg grating, written directly in a highly photosensitive B/Ge/Si annulus of a 12-mm long Er/Yb-P/Al/Si fiber, was employed for determining the temperature rise caused by nonradiative transitions in the Er/Yb fiber by measuring its Bragg wavelength shift. A temperature rise of 0.85 degree(s)C per mW of pump power was measured for the Er/Yb fiber. A fiber laser constructed with a FBG written directly in one end of the fiber and a mirror butt joined to the other end was investigated for the pump-induced thermal effect. Its lasing wavelength was shifted by 0.25 nm when the pump power was varying from 4 mW to 56 mW.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hwa-Yaw Tam, Yuanzhong Xu, and M. Suleyman Demokan "Measurement of pump-induced thermal effect in Er/Yb codoped fiber", Proc. SPIE 3491, 1998 International Conference on Applications of Photonic Technology III: Closing the Gap between Theory, Development, and Applications, (4 December 1998); https://doi.org/10.1117/12.328776
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Progress in thulium doped fiber lasers and aplifiers
Proceedings of SPIE (December 18 2012)
High power Yb-doped fiber laser operates at special wavelength
Proceedings of SPIE (September 17 2013)
Stabilisation of a DFB fibre laser using a tunable loop...
Proceedings of SPIE (November 09 2000)
All fiber Q switched Er Yb co doped fiber ring...
Proceedings of SPIE (January 17 2005)

Back to Top