Paper
23 July 1999 Simulations of a phase corrector plate for the National Ignition Facility
Author Affiliations +
Proceedings Volume 3492, Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion; (1999) https://doi.org/10.1117/12.354147
Event: Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, 1998, Monterey, CA, United States
Abstract
Simulations are presented on the effect of placing a static phase corrector plate in each beamline of the NIF to assist the adaptive optic in correcting beam phase aberrations. Results indicate that such a plate could significantly improve the focal spot, reducing a 3 (omega) , 80 percent spot half-angle from 21 to 8 (mu) rad for poorer-quality optics, and 17 to 7 for better optics. Such a plate appears to be within the range of current fabrication technologies. It would have an alignment requirement of +/- 0.5 mm,l if placed in the front end. The NIF operation, the occasional replacement of laser slabs would slowly degrade the beam quality for a fixed corrector plate, with the spot size increasing from 8 to 15 (mu) rad after four new slabs for poorer optics, and 7 to 12 (mu) rad for better optics. The energy fraction clipped on the injection pinhole would be < 0.5 percent due to this pre-correction.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wade H. Williams "Simulations of a phase corrector plate for the National Ignition Facility", Proc. SPIE 3492, Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, (23 July 1999); https://doi.org/10.1117/12.354147
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Adaptive optics

National Ignition Facility

Optical calibration

Near field optics

Active optics

Optical simulations

Phase shift keying

RELATED CONTENT


Back to Top