15 December 1998 Signal optimization, noise reduction, and systematic error compensation methods in long-path DOAS measurements
Author Affiliations +
Abstract
The increment of the exploitable optical path represents one of the most important efforts in the differential optical absorption spectroscopy (DOAS) instruments improvement. The methods that allow long path measurements in the UV region are presented and discussed in this paper. These methods have been experimented in the new Italian DOAS instrument - SPOT - developed and manufactured by Kayser Italia. The system was equipped with a tele-controlled optical shuttle on the light source unit, allowing background radiation measurement. Wavelength absolute calibration of spectra by means of a collimated UV beam from a mercury lamp integrated in the telescope has been exploited. Besides, possible thermal effects on the dispersion coefficients of the holographic grating have been automatically compensated by means of a general non-linear fit during the spectral analysis session. Measurements in bistatic configuration have been performed in urban areas at 1300 m and 2200 m in three spectral windows from 245 to 380 nm. Measurements with these features are expected in the other spectral windows on path lengths ranging from about 5 to 10 km in urban areas. The DOAS technique can be used in field for very fast measurements in the 245-275 nm spectral range, on path lengths up to about 2500 m.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emilio Simeone, Emilio Simeone, Alessandro Donati, Alessandro Donati, } "Signal optimization, noise reduction, and systematic error compensation methods in long-path DOAS measurements", Proc. SPIE 3493, Spectroscopic Atmospheric Environmental Monitoring Techniques, (15 December 1998); doi: 10.1117/12.332645; https://doi.org/10.1117/12.332645
PROCEEDINGS
9 PAGES


SHARE
Back to Top