Paper
28 August 1998 Microprocessor technology challenges through the next decade
Author Affiliations +
Abstract
Historical microprocessor product trends show an increase in product frequency of 1.25x per year and a transistor count increase of 1.4x per year since the early 70's. This trend is forecast to continue over the next decade to the 0.07micrometers generation. To support the trend, challenges in lithography, transistor definition, interconnect system, and manufacturability must be overcome. Solutions to the lithography challenge,s will require successful implementation of 157 nm optical or next generation lithography. The transistor solution will require integration of sub 2.0nm gate oxides with improved gate electrode materials, improved low resistance shallow source- drain technology, advanced channel dopant engineering, and operation at or below 1.0v. Interconnect challenges will require support of 10 or more interconnect layers using lower resistivity metalization and reduced epsilon dielectric. Manufacturing challenges require support of larger die sizes, integrated at higher technology complexity, while maintaining lowest possible cost.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
George E. Sery "Microprocessor technology challenges through the next decade", Proc. SPIE 3510, Microelectronic Manufacturing Yield, Reliability, and Failure Analysis IV, (28 August 1998); https://doi.org/10.1117/12.324378
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transistors

Lithography

Manufacturing

Metals

Oxides

Resistance

Dielectrics

RELATED CONTENT


Back to Top