Microfabricated silicon gas chromatographic microchannels: fabrication and performance

Carolyn M. Matzke; Richard J. Kottenstette; Stephen A. Casalnuovo; Gregory C. Frye-Mason; Mary L. Hudson; Darryl Y. Sasaki; Ronald P. Manginell; C. Channy Wong

doi:10.1117/12.324309

31 August 1998 Microfabricated silicon gas chromatographic microchannels: fabrication and performance

Carolyn M. Matzke, Richard J. Kottenstette, Stephen A. Casalnuovo, Gregory C. Frye-Mason, Mary L. Hudson, Darryl Y. Sasaki, Ronald P. Manginell, C. Channy Wong

Author Affiliations +

Proceedings Volume 3511, Micromachining and Microfabrication Process Technology IV; (1998) https://doi.org/10.1117/12.324309
Event: Micromachining and Microfabrication, 1998, Santa Clara, CA, United States

Abstract

Using both wet and plasma etching, we have fabricated micro- channels in silicon substrates suitable for use as gas chromatography (GC) columns. Micro-channel dimensions range from 10 to 80 micrometer wide, 200 to 400 micrometer deep, and 10 cm to 100 cm long. Micro-channels 100 cm long take up as little as 1 cm² on the substrate when fabricated with a high aspect ratio silicon etch (HARSE) process. Channels are sealed by anodically bonding Pyrex lids to the Si substrates. We have studied micro-channel flow characteristics to establish model parameters for system optimization. We have also coated these micro-channels with stationary phases and demonstrated GC separations. We believe separation performance can be improved by increasing stationary phase coating uniformity through micro-channel surface treatment prior to stationary phase deposition. To this end, we have developed microfabrication techniques to etch through silicon wafers using the HARSE process. Etching completely through the Si substrate facilitates the treatment and characterization of the micro-channel sidewalls, which dominate the GC physico- chemical interaction. With this approach, we separately treat the Pyrex lid surfaces that form the top and bottom surfaces of the GC flow channel.

Citation Download Citation

Carolyn M. Matzke, Richard J. Kottenstette, Stephen A. Casalnuovo, Gregory C. Frye-Mason, Mary L. Hudson, Darryl Y. Sasaki, Ronald P. Manginell, and C. Channy Wong "Microfabricated silicon gas chromatographic microchannels: fabrication and performance", Proc. SPIE 3511, Micromachining and Microfabrication Process Technology IV, (31 August 1998); https://doi.org/10.1117/12.324309

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available