2 September 1998 Design and experiment of microelectrode arrays for deformable membrane mirror
Author Affiliations +
Proceedings Volume 3513, Microelectronic Structures and MEMS for Optical Processing IV; (1998) https://doi.org/10.1117/12.324263
Event: Micromachining and Microfabrication, 1998, Santa Clara, CA, United States
Abstract
In this paper, a new method which simplifies the design process of micromachined deformable mirrors is presented. By varying the widths of an array of constant-pitched electrodes, the electrostatic-force profile needed to shape the mirror can be precisely controlled by using only one voltage input. A mirror was formed by a thin membrane micromachined from a silicon wafer and is coated with a thin metallic film. The electrodes were deposited on a ground plane over which the membrane is suspended. Viewing the mirror as a surface composed of many small patches with the same pitch, we can calculate the required traction of each patch from the deformed shape by using basic elasticity formulae. The analytical solution of the electrostatic field between the mirror and a electrode of one pitch can be obtained by adopting conformal mapping method. Once the relationship between the traction and the width of the electrode was established, the widths of all the electrodes can be obtained by fitting the electrode width to that of the design goal. This new method applies equally well to design both membrane electrostatic actuators and capacitive sensors. The design method is not necessary to solve the PDEs (Partial Differential Equations) of the structure governing equations, and is always valid for any deformation.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chienliu Chang, Peizen Chang, Kaihsiang Yen, "Design and experiment of microelectrode arrays for deformable membrane mirror", Proc. SPIE 3513, Microelectronic Structures and MEMS for Optical Processing IV, (2 September 1998); doi: 10.1117/12.324263; https://doi.org/10.1117/12.324263
PROCEEDINGS
11 PAGES


SHARE
Back to Top