10 February 1999 Optical tomographic scanning system for detection and monitoring
Author Affiliations +
Proceedings Volume 3534, Environmental Monitoring and Remediation Technologies; (1999) https://doi.org/10.1117/12.339017
Event: Photonics East (ISAM, VVDC, IEMB), 1998, Boston, MA, United States
Abstract
This optical tomography scanner for imaging (3D) applied density distribution as been evaluated for uniformity, resolution, and linearity. Signal to noise ratio of about 1000:1 in both line projection and in back projection reconstructed image has been obtained. Radiation-sensitive BANGR polymer gels were studied using this system. Dose as low as 10 cGy up to 10 Gy for 6 MV X-ray and 6 MeV electrons from linear accelerator have been measured. Since the gels can be made UVlight sensitive, dose distribution could be used to measure exposure using this technique.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kambiz Shahnazi, John C. Gore, "Optical tomographic scanning system for detection and monitoring", Proc. SPIE 3534, Environmental Monitoring and Remediation Technologies, (10 February 1999); doi: 10.1117/12.339017; https://doi.org/10.1117/12.339017
PROCEEDINGS
11 PAGES


SHARE
Back to Top