You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
3 February 1999Vibration measurement of smart composite structures using a new intensity-modulated optical fiber sensor
1Nanyang Technological Univ. (Singapore) and Harbin Institute of Technology (United Kingdom) 2Nanyang Technological Univ. (Singapore) 3Harbin Institute of Technology (China)
A new intensity modulated optical fiber vibration sensor has been employed to monitor the vibration signal in the smart composite structures in this paper. The advantages of this sensor ar the lower cost and the easy-to-use system. The sensor were fabricated using conventional 50/125 step-index multimode optical fibers and the custom-drawn epoxy resin capillary tube. The construction of this sensor is like the extrinsic Fabry-Perot interferometric. A face coupling theory of the intensity modulated fiber optic vibration sensor is developed. This optical fiber sensor has been embedded in the end of the smart composite cantilevered beam. The static and dynamic characteristics of this optical fiber vibration sensor have been tested. At the same time, the compared test of this sensor with commercial piezoelectric transducer are also finished. The experimental results show that the new type of intensity modulated optical fiber vibration sensor has higher sensitivity and better dynamic and static properties. The spectrum response of this sensor are also agreeable to that of the commercial transducer.
Jinsong Leng,Anand Krishna Asundi,Shanyi Du, andDanfu Wang
"Vibration measurement of smart composite structures using a new intensity-modulated optical fiber sensor", Proc. SPIE 3541, Fiber Optic and Laser Sensors and Applications; Including Distributed and Multiplexed Fiber Optic Sensors VII, (3 February 1999); https://doi.org/10.1117/12.339081
The alert did not successfully save. Please try again later.
Jinsong Leng, Anand Krishna Asundi, Shanyi Du, Danfu Wang, "Vibration measurement of smart composite structures using a new intensity-modulated optical fiber sensor," Proc. SPIE 3541, Fiber Optic and Laser Sensors and Applications; Including Distributed and Multiplexed Fiber Optic Sensors VII, (3 February 1999); https://doi.org/10.1117/12.339081