15 August 1998 Theoretical model and experimental study for dry and steam laser cleaning
Author Affiliations +
Abstract
Dry and steam laser cleaning was investigated both theoretically and experimentally. The experimental results show that cleaning efficiency increases with increasing laser fluence or decreasing laser wavelength. The cleaning thresholds exist both dry and steam laser cleaning. A cleaning model was established for laser-induced removal of particles from solid surfaces by taking adhesion force, such as Van der Waals force and capillary force, and cleaning force into account. Laser cleaning forces are induced by fast thermal expansion of particles and/or solid surfaces irradiated by laser for dry laser cleaning and evaporating liquid film heated by laser irradiation for steam laser cleaning, respectively. It was found that laser cleaning forces increase with an increase of laser fluence. At the same laser fluence, cleaning forces increase with decreasing laser wavelength. Cleaning thresholds can be obtained by comparing cleaning force and adhesion force. The experimental results are good consistent with the theoretical analysis.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongfeng Lu, Yongfeng Lu, Wen Dong Song, Wen Dong Song, Y. Zhang, Y. Zhang, Tohsiew Low, Tohsiew Low, } "Theoretical model and experimental study for dry and steam laser cleaning", Proc. SPIE 3550, Laser Processing of Materials and Industrial Applications II, (15 August 1998); doi: 10.1117/12.317931; https://doi.org/10.1117/12.317931
PROCEEDINGS
12 PAGES


SHARE
Back to Top