18 August 1998 Designing the integrated helmet-mounted display for pilots
Author Affiliations +
The design of an integrated helmet-mounted display for pilots is described. The purpose of the design is to provide sufficient information, fine comfort for wear, and low cost. Some factors are considered and compromised in the design. A 3rd generation image intensifier, a half inch cathode ray tube, two combiner eyepieces, and some optical assembly are used in the display. The optical axes of the objective lens, the intensifier, and the combiners are put on one plane with the line of sight of the water. A intensifying channel, a display channel and a see-through channel are included in the display system. These channel present fight symbology and objective scene by multiform way. Accordingly, the design has a great redundance, and the display has fine reliability and the location of the CG, low cost and weight.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu Liu, Yu Liu, } "Designing the integrated helmet-mounted display for pilots", Proc. SPIE 3560, Display Devices and Systems II, (18 August 1998); doi: 10.1117/12.319671; https://doi.org/10.1117/12.319671


Ecological approach to partial binocular overlap
Proceedings of SPIE (August 01 1991)
Helmet display options: a route map
Proceedings of SPIE (October 01 1990)
Helmet Integation: An Overview Of Critical Issues
Proceedings of SPIE (September 05 1989)
Development of the combiner-eyepiece night-vision goggle
Proceedings of SPIE (October 01 1990)

Back to Top