Paper
7 May 1999 Precision optical reference frequencies
Fritz Riehle, Harald Schnatz, G. Zinner, Tilmann Trebst, Juergen Helmcke
Author Affiliations +
Proceedings Volume 3571, Tenth International School on Quantum Electronics: Laser Physics and Applications; (1999) https://doi.org/10.1117/12.347593
Event: 10th International School on Quantum Electronics: Lasers: Physics and Applications, 1998, Varna, Bulgaria
Abstract
Optical reference frequencies are provided by lasers of which the frequencies are stabilized to suitable absorption lines. Presently, twelve reference frequencies/wavelengths within the wavelengths range from 243 nm to 10.3 micrometers are recommended by the International Committee of Weights and Measures as references for the realization of the meter and scientific applications. As typical examples, we describe a diode-pumped, frequency doubled YAG-laser stabilized to an absorption line of molecular iodine and a Ca-stabilized laser. The latter one has been developed in two versions, a transportable system utilizing a small beam of thermal Ca atoms and a stationary standard based on laser cooled and trapped Ca atoms. The frequency of the Ca standard based on cold Ca atoms has been measured by a frequency chain allowing a phase-coherent comparison against the primary standard of time and frequency, the caesium clock. Its value is vCa equals 455 986 240 494.13 kHz with a relative standard uncertainty of 2.5 (DOT) 10-13.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fritz Riehle, Harald Schnatz, G. Zinner, Tilmann Trebst, and Juergen Helmcke "Precision optical reference frequencies", Proc. SPIE 3571, Tenth International School on Quantum Electronics: Laser Physics and Applications, (7 May 1999); https://doi.org/10.1117/12.347593
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calcium

Chemical species

Laser stabilization

Standards development

Absorption

Clocks

Semiconductor lasers

Back to Top